The FLONET FH10XX induction flow meter
The FLONET FH10XX.1 induction flow meter series is intended for the professional application and measurement of flow rates of electrically-conductive liquids in water and heat-supply systems in the food-processing and chemical industries. They meet the most demanding requirements for high accuracy measurement, long-term stability and hygienic standards.
The converter provides the sensor with energy and allows for the processing of sensor signals, and also offers liquid batching control, empty piping detection, internal meter status diagnostics, automatic counter cleaning and selection of flow unit functions via data visualization. The flow meters have frequency, pulse and current outputs, as well as interfaces to the HART communication protocol.
Technical parameters |
|
| usage | measuring conductive liquids |
| type | compact and remote version |
| lining | soft or hard rubber, PTFE |
| dimension range | DN6 to DN1200 (1/4” to 48”) |
| measurement accuracy | ±0.5% for 10% to 100% qs |
| measured fluid temperature | to 150°C (302°F) |
| nominal pressure | from 0.6 to 4 MPa |
| conductivity of measured liquid | from 5µS/cm |
| electrical outputs | standard |
| communication | HART protocol |
| special equipment | - empty pipe detection - internal diagnostic |
| sensor lenght | ISO 13359 |
| protection class | IP67 / IP68 (sensor in remote version) |
| power source | 24 / 115 / 230V ± 10%, 50 to 60Hz (AC), 24V ± 10% (DC) |
Download |
|
| Catalogue sheets | |
 FLONET FH10XX (144.75 kB) |
|
| Manuals | |
| FLONET FH10XX (1.83 MB) |